Accusys TShare A16T3-Share Скачать руководство пользователя

Страница: 56 / 63

6.1 How RAID Works

RAID, or Redundant Array of Independent Disks, is a data-storage technology that

spreads data across multiple drives. This technology provides several benefits:



Data redundancy for protection and availability.



Higher performance as a result of reading or writing on several drives

simultaneously.



Scalability for expansion of storage.

Accusys RAID systems use a hardware controller to manage multiple drives as one or

more RAID array group, which offloads RAID task from host, and provides

independent, fast and highly efficient storage.

The way of controller stores and retrieves data on the RAID system is determined by

the RAID level and storage method you choose. Once you have defined a group of

drives as an array group, each logical disk appears to the host system as one Logical

Unit (LUN), regardless of the number of actual drives in that logical unit.

6.2 RAID Levels

The RAID system supports several RAID levels and configurations. Each level has a

different architecture and provides varying degrees of performance and fault tolerance.

Содержание TShare A16T3-Share
































































Результаты поиска

Содержание TShare A16T3-Share

Отзывы:

Похожие инструкции для TShare A16T3-Share

Бренды по названию

Популярные бренды

Accusys TShare A16T3-Share, Руководство пользователя

Результаты поиска

Содержание TShare A16T3-Share

Отзывы:

Похожие инструкции для TShare A16T3-Share

Бренды по названию

Популярные бренды