Accurian 16-3499 Скачать руководство пользователя

Страница: 15 / 58

Before Operating

Rear Panel

Rear panel jacks.

RF Antenna INPUT (75 Ohm)

- Connect the outdoor/indoor antenna here. Connect cable in the event that a local cable provider is passing 8VSB signal through their system.

Service Port (RS232C)

DO NOT USE THIS PORT AT ANY TIME!

For service only.

VIDEO OUT (CVBS)

- Connect to a TV with video inputs. Use this output for conventional TVʼs without S-video or component input.

DTV COMPONENT VIDEO OUT (Y, Pb, Pr)

- Connect to the Y-Pb-Pr digital video input of a digital compatible TV set (or the Y-Pb-Pr inputs of some other video component).

SPDIF Output (Coaxial)

- Connect to digital (coaxial) input of TV or audio equipment.

S-VIDEO OUTPUT

- Connect to a TV with S-video inputs. Use this output for conventional TV sets without component video inputs.

Left/Right ANALOG-AUDIO OUTPUTS

- Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs). Or, connect

these terminals to the L/R inputs of a separate audio component.

SPDIF Output(Fiber optic connector)

- Connect to digital (optical) input of TV or audio equipment.

HDMI out

- Connect to TV or Receiverʼs input that support HDMI.

Resolution Format Selector

- Switches between 1080i (interlaced scanning), 720p (progressive scanning) and 480p (progressive scanning) for use with component outputs.

Power Cable

- Connect the AC Power 100V ~ 240V into power source.

“ANALOG TV OUT” outputs are displayed in 480i format only.

12345678910112131415

Содержание 16-3499



























































Результаты поиска

Содержание 16-3499

Отзывы:

Похожие инструкции для 16-3499

Бренды по названию

Популярные бренды

Accurian 16-3499, Руководство пользователя

Результаты поиска

Содержание 16-3499

Отзывы:

Похожие инструкции для 16-3499

Бренды по названию

Популярные бренды