Accurate Technology Inc.
Page 15 of 20
To change the delimiter to a tab character, type:
D<TAB><ENTER> Where <TAB> = the PC tab key.
The receiver responds with:
Delimiter now = <tab>
Echo Mode
To display the current echo mode (from default), type in:
e<ENTER>
The receiver responds with:
Echo mode < >
(Factory Default = on)
To change the echo mode to off, type:
E0<ENTER>
Use 0 (zero) for off and 1 for on
The receiver responds with:
Echo mode off
Record Start Marker
To display the current record start marker status (from default), type in:
m<ENTER>
The receiver responds with:
Marker mode < >
(Factory Default = off)
To change the record start marker mode to on, type:
M1<ENTER>
Use 0 (zero) for off and 1 for on
The receiver responds with:
Marker mode on
Terminator Type
To display the current terminator type (from default), type in:
t<ENTER>
The receiver responds with:
Terminator = < > ()
(Factory Default = <CR/LF> (0))
To change the terminator mode to CR only (1), type:
T1<ENTER>
Use 0 (zero) for CR/LF and 1 for CR only
The receiver responds with:
Terminator now = <CR> (1)
