Accurate Technology DigiStop-10, Руководство по установке и эксплуатации

Страница: 14 / 20

Manual Part # 800-1070-001 Rev 10-2016 Page 14 of 20
Circuit Board Jumpers
The Digi-Stop readout has several user configurable jumpers consisting of
three pins and
a ‘shorting block or jumper’.
The center of these three
pins is ‘Common’. One end pin is labeled
A and the
other end pin is labeled B .
JP1
FACTORY USE ONLY
JP2 Programming Lockout
Position A , Front Panel Programming is ENABLED
Position B , Front Panel Programming is DISABLED
JP1 JP2