8
ENGLISH
Connection example 1
Playback with DG-38/DG-48 connected
The Digital Voicing Equalizer DG-38 or DG-48 can be connected to the E-350, allowing highly precise sound fi eld compensation during playback of program sources.
●
For details on connection and operation of the DG-38/DG-48, please refer to instruction manual of the respective component.
Memo
Both connection examples below show the connection to the DG-38.
When using the DG-48, option boards are not required, because the DG-48 incorporates line inputs and outputs as standard equipment.
The DG-38/DG-48 is connected to the RECORDER jacks (RECORDER 1 or RECORDER 2) of the E-350.
The DG-38/DG-48 is connected between the preamplifi er and power amplifi er sections of the E-350, with the EXT PRE button set to ON to separate the
preamplifi er and power amplifi er sections.
Left speaker
Right speaker
Note:
Do not set the EXT PRE button to OFF. Doing so takes
the DG-38 out of the signal path and may cause a sudden
increase in volume.
Set
EXT PRE
button to
(“EXT PRE”
LED lit)
✽
Use INPUT SELECTOR of E-350
to select program source.
Analog
output
Source component
Line input board:
AI2-U1
Line output board:
AO2-U1
✽
Select “Analog in-1”
on INPUT SELECTOR
menu of DG-38.
Install AI2-U1 and AO2-U1 in option board slots of DG-38.
✽
Set switch on AI2-U1 board to 96 kHz.
Use audio cables with plugs
E-350 PRE OUT
AI2-U1
E-350 POWER IN
AO2-U1
Left speaker
Right speaker
✽
Select “Analog in-1”
on INPUT SELECTOR
menu of DG-38.
Line input board:
AI2-U1
Line output board:
AO2-U1
Install AI2-U1 and AO2-U1 in option board slots of DG-38.
✽
Set switch on AI2-U1 board to 96 kHz.
Use audio cables with plugs
E-350 PRE OUT
AI2-U1
E-350 POWER IN
AO2-U1
CD player
Analog
output
Source component
CD player
To PLAY
From REC
Note:
When the RECORDER selector is set to
“SOURCE” or “REC OFF”, the DG-38 is taken
out of the signal path which may cause a sudden
increase in volume.
●
Preamplifi er and power amplifi er sections are
separated.
DG-38 rear panel
From PRE OUT
To POWER IN
✽
In the illustration example, RECORDER selector of E-350 is set to “1”.
✽
Use INPUT SELECTOR of E-350 to select the program source.
DG-38 rear panel
Front panel
Set
EXT PRE
button to
(“EXT PRE”
LED out)
●
Preamplifi er and power amplifi er sections are not
separated.
Front panel
Connection example 2
Содержание E-350
Страница 49: ...55 Block Diagram ...
Страница 50: ...56 Memo ...