AccuLine TNplus 1000Lm, Руководство пользователя

Страница: 35 / 86

-32-
batteries. If there is a battery breaker then turn it off first. Disconnect the
battery cable carefully and make sure that there are no exposed wires
that can be touched. Reconnect the new batteries to the UPS by
following the instructions in section 5.2. Then turn on the battery
breaker and press the ON switch to set the UPS in performing battery
test. Check whether the battery information are normal.
10. Technical Data
10.1 Electrical specifications
INPUT
TNplus. 1000m 1000Lm 2000m 2000Lm
3000m /
3000m PRO
3000Lm
Phase Single
Frequency 45-55 / 54-66 Hz
Voltage 220/230/240VAC
Current(A)
4.9/4.7/4.5 5.7/5.4/5.2 9.7/9.3/8.9 9.7/9.3/8.9 14.5/13.9/13.3 14.5/13.9/13.3
OUTPUT
TNplus 1000(L)m 2000(L)m 3000(L)m (PRO)
Power rating* 1kVA/0.9kW 2kVA/1.8kW 3kVA/2.7kW
Voltage 220Vac/230Vac/240Vac
Frequency 50/60Hz
Wave form sinusoidal
*Note: the active power is defined in rated voltage input
BATTERIES
TNplus. 1000m 1000Lm 2000m 2000Lm
3000m
(PRO)
3000Lm
Voltage 24V 24V 48V 48V 72V 72V
Capacity 9Ah 5Ah~120Ah* 9Ah 5Ah~120Ah* 9Ah 5Ah~120Ah*
*Note:
1. the Capacity of the external batteries can be set to 300Ah maximum but it is
strongly recommended not to exceed the 120Ah.
2. For the standard models 1000m / 2000m / 3000m / 3000m PRO the capacity
should not be set over 30Ah.