AccuLine TNplus 1000Lm, Руководство пользователя

Страница: 28 / 86

-25-
Button.
Only one voltage value can be selected at a time 220V 230V
240V
Only one frequency value can be selected 50Hz 60Hz ;
The Bypass status can be selected between 000 and 001 , where 000
means Bypass Disable and 001 means Bypass Enable The UPS will
transfer to bypass mode several seconds after Bypass Enabled has been
selected, or transfer to no output mode several seconds after Bypass
Disabled has been selected;
The Operating mode can be selected among UPS , ECO and CVF ,
where UPS means the normal online mode, ECO means the high
efficiency mode and CVF means the converter mode. The selected mode
will not be activated unless the UPS is turned on.
The External Battery Pack Number can be selected from 001 to 009
where 009 means 9 external battery packs.
The external battery Ah can be selected from 005 to 300 005
means an external battery string of 5Ah in total.
Note: By default, users can select The External Battery Pack Number.
It is suggested that you keep this option while using one or more
standard battery cabinets (EBMs). Otherwise, you can change this via
the software so that the LCD module will allow you to select the
capacity (Ah) of the external Battery Bank.
The Charger Current can be selected between 3.0/6.0 for 1000Lm model
and among 1.5/3.0/4.5/6.0 for 2000Lm & 3000Lm models, where 3.0 means
3A charger.
The battery remaining time function can be selected between and
displayed on the LCD when the UPS is operating in battery mode; On the
ction is enabled: