AccuLine TNplus 1000Lm, Руководство пользователя

Страница: 33 / 86

-30-
bUSS Bus short UPS internal fault
Notify your supplier.
TEPH Inverter
temperature
high
he internal
temperature of the
UPS is too high
Check the ventilation of
the UPS, check the
ambient temperature.
ITPH Inner Ambient
temperature
high The ambient
temperature is too
high Check the ventilation of
the environment.
INVH Inverter high UPS internal fault
Notify your supplier.
INVL Inverter low UPS internal fault
Notify your supplier.
ISFT Inverter soft
start fail UPS internal fault
Notify your supplier.
NTCO Inverter NTC
open UPS internal fault
Notify your supplier.
SHOR Inverter short Output short
circuit Remove all the loads.
Turn off the UPS. Check
whether the output of
the UPS and the loads
are short circuit. Make
sure that the short
circuit is restored, and
the UPS has no internal
faults before turning it
on again.
OVTP Over
temperature
fault Over temperature Check the ventilation of
the UPS, check the
ambient temperature
and ventilation.
OVLD Overload Overload Check the connected
loads and remove some
non-critical ones.
Check whether some
loads have failed.
SITE
Site fail Phase and neutral
conductors are
reversed at the
UPS input. Rotate the plug of the
input cable by 180° and
connect it to the mains
socket.
EPO EPO active EPO function is
enabled Replace the EPO switch
to its normal position.