Accucold APRF11, Руководство пользователя

Страница: 4 / 10

4
equipment is only to be used with the power supply unit provided with the equipment.
•
Do not use electrical equipment inside the cold storage compartments of the equipment, unless they
are of the type recommended by the manufacturer.
•
Once unpacked and before turning on, the equipment must be placed on a level surface for more
than 6 hours.
•
Make sure that the equipment stays horizontally when it is running. The tilt angle must be less than 5°
for long time running and be less than 45° for short time running.
•
Keep the ventilation openings in the unit casing or in the built-in structure free of obstacles. (Around
the compressor≥100mm).
•
Keep the equipment stable on the ground or in the car; Do not drain upside down.
CAUTION: Repairs may only be carried out by qualified personnel. Incorrect repair may cause danger.
The lamp and supply cord must be replaced by the manufacturer or qualified persons.
•
Disconnect the power supply before each cleaning and maintenance and after every use.
•
Do not use sharp tools to defrost; Do not damage the refrigerant circuit.
•
heck if the cooling capacity of the equipment is suitable for storing the medicine.
•
If the equipment is left empty for long periods, switch off, defrost, clean, dry, and leave the door open
to prevent mold from developing within the equipment.
•
The equipment is intended to be used in medical and similar applications.
•
Please according to local regulations
- SAVE THESE INSTRUCTIONS
–