69
70
AA-4397 Installation Manual
REV 01 | 05/25/2023
12. Remove track bar bracket and drill centering mounting hole using a 15/32” drill bit and reassemble the bracket
and track bar. (Figure 99)
FIGURE 99
NOTE:
It may be necessary to raise/lower axle to take pressure off track bar bolt.
13. One at a time, remove the OEM rear lower control arms & install the new rear lower control arms using the OEM
hardware, & a 21mm socket/wrench. Note the location of the height sensor mounting tab on the upper control
arms should be facing up and towards the chassis side. (Figure 100)
FIGURE 100
14. Install rear ride height sensor bracket assembly to the frame using the existing hole and tighten to 17 ft-lbs.
(Figures 101, 102)
FIGURE 101 - RIGHT REAR
FIGURE 102 - RIGHT REAR
REAR INSTALLATION
