manualshive.com logo in svg

Accu AXIOM, Руководство по линейке продуктов

Accu-Sort AXIOM - Продукт, который поможет вам эффективно считывать штрихкоды. Загрузите бесплатное руководство по быстрому доступу и руководство по эксплуатации с manualshive.com. Улучшите производительность вашего бизнеса с помощью этого профессионального оборудования.

Поделиться
Скачать
background image

188 Appendices 

AXIOM

™

 / AXIOM-X

™

 Product Line Manual

 

 

Accu-Sort Systems, Inc. 

A1-AXIOM-AXIOM-X_Appendices_R10.doc 

Network Host Communications 

The AXIOM provides a number of options for transmitted bar code to another 
computer (typically referred to as the “host”).  Additionally, two simultaneous 
host network connections are supported each with different message 
definition and formatting.  These connections use ports 3001 and 3002 by 
default, but these values are modifiable. 
 

TCP/IP Server 

Operation as a TCP/IP server is the default configuration for the AXIOM.  In 
this case, for an application to communicate with an AXIOM from a "host 
computer", the application should just initiate a simple TCP/IP socket 
connection.  When a socket connection to the AXIOM is established, the 
green AXIOM network LED will be illuminated (unless client/controller mode 
is in use in which the LED indicates the status of the inter-AXIOM network 
connections). 
 

 

 
One issue should be considered when designing such an application:  As 
with any socket connection, if one side or the other terminates the 
connection without properly closing it - the connection can be left open.   
 
For example, if a host computer has initiated a connection to an AXIOM and 
the host computer "crashes" - the connection on the AXIOM will remain open 
until the AXIOM attempts to send the next message (normally the next bar 
code).  At this point, the AXIOM will detect the connection from the host 
computer has been terminated and clear the connection allowing the host 
computer to reconnect.  
 
However, it is possible that the AXIOM might be powered off while a host 
connection is active (or if the power is cycled on an intermediate piece of 
network equipment such as a hub or a switch).  In this case, the AXIOM 
socket connection will be closed but the host computer may not be aware of 
this change.  To handle this situation, it may be desirable to implement a 
means by which the host computer can test the state of the network 
connection. 
 
One option is to periodically send a simple message (e.g., just a null 
character or just a single STX character) to the AXIOM verifying the link is 
still active. 
 
Another option is for a heartbeat message to be enabled on the AXIOM.  
This both provides the host computer with a means for determining if the link 
has been lost (by lost of the heartbeat) and provides the AXIOM with quicker 
determination of lost of communications with the host computer.  This is the 
recommended approach. 

 

Содержание AXIOM







































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AXIOM

Yarvik EBR070 GoBook User Manual preview
EBR070 GoBook
Бренд: Yarvik Страницы: 222
Hamlet HBCS2D100US User Manual preview
HBCS2D100US
Бренд: Hamlet Страницы: 58
Thinkcar THINKTOOL Quick Start Manual preview
THINKTOOL
Бренд: Thinkcar Страницы: 5
Syris SYRDT5 Series Install And Operation Instructions preview
SYRDT5 Series
Бренд: Syris Страницы: 5
RTscan RT830A Quick User Manual preview
RT830A
Бренд: RTscan Страницы: 8
Paragon id ASK LoGo User Manual preview
ASK LoGo
Бренд: Paragon id Страницы: 4
Franklin Bookman ESL-580 User Manual preview
Bookman ESL-580
Бренд: Franklin Страницы: 20
Kobil SecOVID Reader III Manual preview
SecOVID Reader III
Бренд: Kobil Страницы: 20
Motorola SE4710 Integration Manual preview
SE4710
Бренд: Motorola Страницы: 82
Motorola SYMBOL MT2000 Series User Manual preview
SYMBOL MT2000 Series
Бренд: Motorola Страницы: 304
Motorola SYMBOL LS9203i Quick Start Manual preview
SYMBOL LS9203i
Бренд: Motorola Страницы: 2
Motorola Symbol CS3070 Quick Reference Manual preview
Symbol CS3070
Бренд: Motorola Страницы: 24
Motorola Symbol MS4404 Integration Manual preview
Symbol MS4404
Бренд: Motorola Страницы: 432
Motorola Symbol CS3000 Series Manual preview
Symbol CS3000 Series
Бренд: Motorola Страницы: 153
Motorola Symbol DS3407 Reference Manual preview
Symbol DS3407
Бренд: Motorola Страницы: 404
Motorola STB4278 User Manual preview
STB4278
Бренд: Motorola Страницы: 418
IDTECH ViVOpay VP3350 Integration Manual preview
ViVOpay VP3350
Бренд: IDTECH Страницы: 33
Pocketbook SURFpad 4 S User Manual preview
SURFpad 4 S
Бренд: Pocketbook Страницы: 47

Бренды по названию

Популярные бренды

Загрузить еще бренды