Accu-Scope EXI-300 Series, Руководство пользователя

Страница: 15 / 18

EXI-300 INVERTED MICROSCOPE SERIES
ACCU-SCOPE
®
15
OBJECTIVE SPECIFICATIONS
Category Magnification
（
N.A
）
Working
Distance
（
mm
）
Conjugate
Distance
（
mm
）
Parfocal
Distance
（
mm
）
Coverslip
Thickness
Infinity
Long Working
Distance Plan
Achromatic
Objective
4X 0.10 22
∞
60 1.2 mm
Infinity
Long Working
Distance Plan Phase
Contrast Objective
10X 0.25 6
∞
60 1.2mm
20X 0.4 3.1
∞
60 1.2mm
40X
(Optional)
0.55 2.2
∞
60 1.2mm
TROUBLESHOOTING
Under certain conditions, performance of this unit may be adversely affected by factors other than defects. If a
problem occurs, please review the following list and take remedial action as needed. If you cannot solve the
problem after checking the entire list, please contact your local dealer for assistance.
OPTICAL
PROBLEM CAUSE
SOLUTION
The illumination is on, but the
field of view is dark.
The socket pin is not connected to the
illumination column Connect it securely
The bulb is burnt out. Replace it with a new one
The brightness is set too low Set it to the appropriate position
Two many filters are stacked Reduce them to the minimum required
number
The edge of the field of view is
obscured or not evenly
illuminated.
The nosepiece is not in the located position Turn the nosepiece into the position where
you can hear it engaged
the color filter is not inserted fully Push it in all the way
The phase contrast slider is not located in the
proper position Move the slider until it clicks into place
Dirt or dust is visible in the field
of view
Dirt/dust on the specimen Replace with a clean specimen
Dirt/dust on the eyepiece Clean the eyepieces
The image glares The iris diaphragm is closed too much Open up the iris diaphragm