33
(b) Point to Point Model (Without the LAN)
There are two ways to communicate with the PC
without
the LAN: One is by WIFI function (wireless),
and the other is by network cable (here is crossover cable). We call both of them point-to-point
communication.
Attention:
1. To use the WIFI function, the PC receiver must support wireless function, please check whether your
network card support wireless function or not.
2. To use network cable to link the LCD Microscope and PC, the network cable must be a crossover cable.
See the part V to know
what are straight and crossover cable
3. The NMSClient software must be installed on the PC to receive the images sent by the LCD microscope.
4. In this model, one LCD microscope can only communicate with one PC, it can not communicate with
more than two PCs.
5. In order to ensure the image transmission quality when using the WIFI function, please make sure the
LCD microscope is not very far from the PC and is in a non-blocking space.
(c) LCD Microscope to LCD Microscope (is not supported)
1. WIFI function
2.
Network cable (
crossover cable
)
…
More than two PCs
