34
(d) Visit the Internet
Attention:
We can use the LCD microscope to visit a website, but we can
not
receive the microscope images though
the internet, just browse the web pages.
4.3 Network Communication
Attention:
1. There are two ways to link the LCD digital microscope to the LAN, one is with its WIFI function, and
the other one is through the network cable. The PC has the same two ways to link to the LAN, too.
2. To use the WIFI function, the
router
of the LAN and the
PC
must support wireless function, and you
should check whether the router and the PC‟s network card support wireless function.
3. To use the wired network, the network cable should be a straight cable. See the part V to know
4. The NMSClient software must be installed on the PC to receive the images sending by the LCD
microscope.
5. The LCD microscope, router and PC‟s IP address must be on the same LAN. And at present, only one PC
can receive the images sent by the LCD microscope.
6. In order to ensure the image transmission quality in using the WIFI function, please make sure the signal
is not too low, for example, the LCD microscope is not very far from the router and is in a non-blocking
space.
4.3.1 WIFI function
To use this WIFI function, you need a computer and a wireless support
router.
1. WIFI function
2. wired network
(straight cable)
1. WIFI function
2. wired network
(straight cable)
