26
SPECIFICATIONS – SC MODEL
Applications:
Use for indoor or outdoor applications where occasional
moisture is common.
Materials:
Acetal, Polyester (decals), Viton (gasket & seals), Stainless
Steel (fasteners)
Power Source:
5 to 30 VDC loop voltage required for correct operation.
Maximum current (exclusive of output current) = 25 mA
Accuracy/Performance:
Accurate to ±1 count
Frequency Range:
0-1500 Hz
Operating Temperature:
-40° F to +185° F (-40° C to +85° C) (Electronics only)
Cable:
20 ft., 3 conductor, shielded (Belden 9363)
Mechanical Connections:
Unit is mounted directly to flow meter body.
Electrical Connections:
One strain relief port: one threaded plug (1/2 x 20).
Weight:
1.1 lb. (.5 kg) (Additional)
DIMENSION DRAWING - TYPICAL
WEEE DIRECTIVE
The Waste Electrical and Electronic Equipment (WEEE) directive
(2002/96/EC) was approved by the European Parliament
and the Council of the European Union in 2003. This symbol
indicates that this product contains electrical and electronic
equipment that may include batteries, printed circuit boards,
liquid crystal displays or other components that may be
subject to local disposal regulations at your location. Please
understand those regulations and dispose of this product in
a responsible manner.
For warranty consideration, contact your local distributor. If
you need further assistance, contact the GPI Customer Service
Department at:
Toll free: 1-888-996-3837
You will need to:
• Provide information from the decal on your meter.
• Receive a Return Authorization number.
• Flush any fluid from the meter before shipping to the factory.
If possible, leave customer installed fittings or ample length of
bare pipe for reinstallation.
Do not return the meter without specific authority from the
GPI Customer Service Department. Due to strict regulations
governing transportation, handling and disposal of
hazardous or flammable liquids, GPI will not accept meters
for rework unless they are completely free of liquid residue.
SERVICE
CAUTION
Содержание TM Series
Страница 27: ......