manualshive.com logo in svg

Accu-Cut IVC 15, Руководство оператора

Поделиться
Скачать
Accu-Cut IVC 15 Скачать руководство пользователя страница 37

om-1500-02-010506 

                                                          Page 37 of 37 

 

Limitation of Liability 

 
1. 

Vidir Machine Inc. makes no warranties whatsoever, either express or implied, oral or 
written, in fact or by operation of law or otherwise, except as expressly stated in this 
agreement. 

 
2. 

Vidir Machine Inc., its officers, directors, agents and servants and its affiliates and 
their respective officers, directors, agents and servants shall not be liable to you the 
buyer nor to any other party for any liability, including without limitation  strict liability, 
including liability for loss or damages due directly or indirectly to occurrences or 
consequences which the material handling machine is designed, nor for any losses or 
damages, including without limitation economic and consequential losses, or direct or 
indirect, incidental, exemplary and punitive damages whether in contract, tort or 
otherwise or any other claims or expenses in any manner resulting, including without 
limitation liability, losses or damages directly or indirectly from, or connected with, the 
supply of the material handling machine whether or not supplied pursuant to this 
agreement, or from the failure to so discover or eliminate. 

 
3. 

Vidir Machine Inc. assumes no liability whatsoever with regard to the Buyer's 
compliance or fulfillment of its obligations with respect to any part of this manual or 
any statute, regulation or by-law prevailing, or the Buyer's failure to so comply with or 
fulfill its obligations. 

 
4. 

Any decision or action implemented or action taken by you the Buyer in respect of the 
material handling machine not in strict compliance with this manual is solely the 
decision of you the Buyer. 

 
5. 

No supervisory action or services is being provided by Vidir Machine Inc. to you as 
part of your purchase of the material handling machine. 

 
6. 

Vidir Machine Inc. shall not be liable for any loss or damage suffered by you the 
buyer caused by your failure to follow any instruction in this manual or where such 
loss or damage is caused by an event, omission or condition not reasonably within 
the control of the Vidir Machine Inc . 

 
 
 
 
 
 
 
 
 

Содержание IVC 15






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды