Accton Technology VDSL Switch-VS4512 Скачать руководство пользователя страница 315

Страница: 315 / 334

IP Interface Commands

4-169

show ip redirects

This command shows the default gateway configured for this device.

Default Setting

None

Command Mode

Privileged Exec

Example

Related Commands

ip default-gateway (4-168)

ping

This command sends ICMP echo request packets to another node on the network.

Syntax

ping

host

[

count

][

size

]

•

host

- IP address or IP alias of the host.

•

count

- Number of packets to send. (Range: 1-16, default: 5)

•

size

- Number of bytes in a packet. (Range: 32-512, default: 32)

The actual packet size will be eight bytes larger than the size specified
because the switch adds header information.

Default Setting

This command has no default for the host.

Command Mode

Normal Exec, Privileged Exec

Command Usage

• Use the ping command to see if another site on the network can be reached.
• Following are some results of the

ping

command:

•

Normal response

- The normal response occurs in one to ten seconds,

depending on network traffic.

•

Destination does not respond

- If the host does not respond, a “timeout” appears

in ten seconds.

•

Destination unreachable

- The gateway for this destination indicates that the

destination is unreachable.

•

Network or host unreachable

- The gateway found no corresponding entry in the

route table.

• Press <Esc> to stop pinging.

Console#show ip redirects
ip default gateway 10.1.0.254
Console#

Содержание VDSL Switch-VS4512















































































































































































































































































































































Результаты поиска

Содержание VDSL Switch-VS4512

Отзывы:

Accton Technology VDSL Switch-VS4512, Руководство по управлению, Страница: 315 / 334

Результаты поиска

Содержание VDSL Switch-VS4512

Отзывы: