Accton Technology VDSL Switch-VS4512 Скачать руководство пользователя страница 205

Страница: 205 / 334

Flash/File Commands

4-59

whichboot

This command displays which files were booted when the system powered up.

Default Setting

None

Command Mode

Privileged Exec

Example

This example shows the information displayed by the

whichboot

command. See

the table under the

dir

command for a description of the file information displayed by

this command.

boot system

This command specifies the image used to start up the system.

Syntax

boot system

{

boot-rom

config

opcode

filename

The type of file or image to set as a default includes:
•

boot-rom

- Boot ROM.

•

config

- Configuration file.

•

opcode

- Run-time operation code.

The colon (:) is required.

filename

- Name of the configuration file or image name.

Default Setting

None

Command Mode

Global Configuration

• Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.

Example

Console#whichboot
   file name file type startup size (byte)
----------------- -------------- ------- -----------
   diag_0060 Boot-Rom image Y   111360
   run_0200 Operation Code Y   1083008
   startup Config File Y   2710
Console#

Console(config)#boot system config: startup
Console(config)#

Содержание VDSL Switch-VS4512















































































































































































































































































































































Результаты поиска

Содержание VDSL Switch-VS4512

Отзывы:

Accton Technology VDSL Switch-VS4512, Руководство по управлению, Страница: 205 / 334

Результаты поиска

Содержание VDSL Switch-VS4512

Отзывы: