294
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Collecting
Whether status of port bound status machine is “collecting” or not.
Distributing
Whether status of port bound status machine is “distributing” or
not.
Defaulted
Whether the local port is using default partner end parameter.
Expired
Whether status of port receiving status machine is “expire” or not.
Selected
Whether the port is selected or not..
5. Display port-channel information for port-group1.
Switch#
show port-group 1 port-channel
Port channels in the group 1:
-----------------------------------------------------------
Port-Channel: port-channel1
Number of port : 2 Standby port : NULL
Port in the port-channel :
Index Port Mode
------------------------------------------------------
1 Ethernet1/1 active
2 Ethernet1/2 active
Displayed information
Explanation
Port channels in the group
If port-channel does not exist, the above information will not be
displayed.
Number of port
Port number in the port-channel.
Standby port
Port that is in “standby” status, which means the port is qualified to
join the channel but cannot join the channel due to the maximum
port limit, thus the port status is “standby” instead of “selected”.
13.4.1.2 debug
lacp
Command: debug lacp
no debug lacp
Function:
Enables the LACP debug function: “
no debug lacp”
command disables this debug
function
.
Command mode:
Admin Mode
Default:
LACP debug information is disabled by default.
Usage Guide:
Use this command to enable LACP debugging so that LACP packet processing
information can be displayed.
Example:
Enabling LACP debug.
