Accton Technology EN2218-1, Руководство пользователя

Страница: 12 / 62

Installation 2-1
Chapter 2
Installation
This chapter describes your PC Card and shows you how to install it. To install
the Fax Utility, see instructions that come with the software.
Pre-Installation Considerations
When preparing to install your PC Card, make sure you have the required
hardware and software in place. Installation procedures vary for different
PCMCIA-compliant computers. During installation, the power to your PC may be
ON or OFF .
Caution
: The Y-cable is designed to work only with analog telephone systems. It
cannot be used on digital phone lines. Both types use the same RJ-11
plug, but plugging a digital phone line into your PC Card will damage the
adapter.
Installing the Hardware
PC Card Installation
1. Hold the card by its edges with the Accton logo facing up and the 68-pin PC
Card connector towards the card slot.
2. Insert the card into the PCMCIA slot and gently push it in. Make sure that the
connectors are properly aligned and firmly seated. (Do not force the card into
the slot. You might damage the pins in the socket.)