Accton Technology CheetahAccess Wireless Gateway AC-IG2004W, Руководство пользователя

Страница: 62 / 74

Cables
B-2
Straight-through Cable
Crossover Cable
RJ-45 Port Pin Assignments
All LAN ports on the CheetahAccess Wireless Gateway support automatic MDI/
MDI-X configuration. This means that the pin signals in use will depend on whether
the LAN port is operating in MDI or MDI-X mode. However, the WAN port is
configured only for MDI-X mode.
Caution:
DO NOT plug a phone jack connector into any RJ-45 port. For Ethernet
connections, use only twisted-pair cables with RJ-45 connectors that conform
with FCC standards.
Straight-Through RJ-45 Pin Assignments
End 1 End 2
1 (TD+) 1 (TD+)
2 (TD-) 2 (TD-)
3 (RD+) 3 (RD+)
6 (RD-) 6 (RD-)
Pins 4, 5, 7 and 8 are not connected.
Crossover RJ-45 Pin Assignments
End 1 End 2
1 (TD+) 3 (RD+)
2 (TD-) 6 (RD-)
3 (RD+) 1 (TD+)
6 (RD-) 2 (TD-)
Pins 4, 5, 7 and 8 are not connected.
Pin MDI Signal Name* MDI-X Signal Name*
1 Transmit Data (TD+) Receive Data (RD+)
2 Transmit Data (TD-) Receive Data (RD-)
3 Receive Data (RD+) Transmit Data (TD+)
6 Receive Data (RD-) Transmit Data (RD-)
Pins 4, 5, 7 and 8 are not connected.
* The “+” and “-” signs represent the polarity of the wires that make up each wire
pair.