![background image](http://html1.mh-extra.com/html/accorroni/s-series/s-series_operation-and-installation-manual_3764466030.webp)
Swimming Pool Heat Pump – S series
Opera
ti
on and Installa
ti
on Manual
29
2016/02
Some parameters can be checked and adjusted by the controller. Below is the parameter list.
0
Parameter Name
1
2
No
Memory function if power off
Range
Remark
0 (no) \ 1 (yes)
1
Adjustable
Timer cycle (every day or once)
The interval for defrosting
Defrosting max. lasting time
Compressor exhaust gas protection
Setting temp. upper limit
Water pump running mode
Pump-off time after reaching
setting water temp.
Second anti-freezing mode
4
6
7
8
9
10
11
12
13
1. Power off meet set temperature
14
15
16
17
18
Unit mode selection
Inlet water temp.
Outlet water temp.
Coil temp.
Exhaust gas temp.
Ambient air temp.
2-10°C
0-3°C
30-90Min
-30°C ~ 0°C
("-" and "°C" not display)
0 (Special) \ 1 (Normal)
0-15Min
90-120°C
0 (cooling only) \
1 (cooling and heating) \
2 (heating only)
0~127°C
-9~99°C
-9~99°C
1
3
0
40Min
-7°C (only
display “7”)
20°C
8Min
118°C
40
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Adjustable
Unvalid
Unadjustable
2. Meet set temperature
3. Water-switch breakdown
4. Antifreeze finishing then stop the machine
5. Defrosting preparation
6. Defrosting off
7. Mode change
8. Exhaust air temp. is too high, then stop the machine
9. Low-pressure switch cutting
10. High-pressure switch cutting
11. Water-temp. resistance’s breakdown
12. Pipe-temp. resistance’s breakdown
13. Ambient temp. resistance’s breakdown
Remark: the machine off code
0 (once) \ 1 (every day)
X (Temp. difference between
compressor start inlet water
temp. and setting water temp.)
3
5
Defrosting entry coil temperature
2-30°C
40-65°C
1
Adjustable
3-20MIN
15
Adjustable
0 (HP)
0
1
Adjustable
-9~99°C
-9~99°C
Notes:
As only 2 number digits available for control display, the display will have some change if over
2 digits, for example "108" will display as "A8", "118" will display "B8", and "128" will display “C8”.
PARAMETER CHECKING AND ADJUSTMENT
Parameter list
Default
Y (Temp. difference between
compressor stop inlet water
temp. and setting water temp.)
Defrosting-off coil temp.
Real test value
Real test value
Real test value
Real test value
Real test value
Содержание S Series
Страница 24: ...Swimming Pool Heat Pump S series The 3rd ON OFF timer setting Operation and Installation Manual 23 2016 02...
Страница 37: ...Swimming Pool Heat Pump S series Operation and Installation Manual 3 2016 02...
Страница 38: ...NOTES...
Страница 39: ...NOTES...