Accorroni S Series, Руководство по эксплуатации и установке

Страница: 16 / 40

Swimming Pool Heat Pump – S series
HOW TO USE THE COOLING MODE
CAUTION: Before you begin, make sure the filter pump is in a state ofoperation.
Step 1: Press
once to turn on your pump.
Step 2:Press to select from one mode to the other until you see the Cooling mode.
Step 3: Use or to select the desired temperature (8-28° C).
Example
If you chose the value 25 ° C, the screen will display:
Once the symbol
stops flashing, there quested
temperature will be validated and
up to the temperature of the water
current (in our example 27 °).
Your screen will display:
Good to know about the operation of the cooling mode
When the temperature of the incoming water is greater than or equal to the required
tempe X ° C, the compressor will enter cool down mode. The compressor stops
when the temperature of the incoming water is less than or equal to the required
temperature.
Directions for setting range X and Y
X: parameter adjust from 2 ° to 10 ° C, the default setting is 3 ° C
Y: parameter adjust from 0 ° to 6 ° C, the default setting is 0 °
Flash
Requested temp.
Current water temp.
Current ambient temp.
Operation and Installation Manual 15 2016/02