Accorroni HPE 018, Техническое руководство, Страница: 27 / 35

28
13 INSTALLATION CLEARANCE REQUIREMENTS
To guarantee the proper functioning of the unit and access for
maintenance purposes, it is necessary to comply with the
mini-mum installation clearance requirements shown in figures
installation space rpe 18 - 27 , installation space hpe 28-40 -.
Ū Verify that there are no obstacoles in front of the fans air out-
let.
Ū avoid any and all situations of backflow of hot air between
air outlet and inlet of the unit.
Ū If even only one of the above conditions is not fulfilled,
please contact the manufacturer to check for feasibility.
Ū In the design of the MPE series, special care has been taken
to minimise noise and vibrations transmitted to the ground.
Ū Even greater insulation may be obtained, however, by using
vibration damping base supports (available as optional ac-
cessories).
Ū If vibration damping base supports are adopted, it is strong-
ly recommended also to use vibration damping couplings
on the water pipes.
Ū Whenever the unit is to be sited on unstable ground (various
types of soil, gardens, etc.) it is a good idea to provide a sup-
porting base of adequate dimensions.
WARNING heat pump units produce condensation while
operating in the heating mode.