![Accora Configura Скачать руководство пользователя страница 50](http://html1.mh-extra.com/html/accora/configura/configura_instruction-manual_3699763050.webp)
50
© Accora Configura® assessment helpline: 01223 206110 | [email protected] | www.configura.uk.com
Initial Installation
Prior to installation and use, please ensure the chair will not be hindered by any object as this will affect the
performance and could damage the mechanism.
•
Position the chair free from any obstruction and trailing wires.
•
Position the back onto the brackets and refit the cover at the back of the chair. You will find a locking clip
attached to the bracket, which should be pushed away from you to lock the back into position.
•
The chair should be positioned with enough room for the chair to fully recline.
•
There will be an extension cable located at the rear of this chair. For safety reasons and before connecting to
the transformer, check that this cable has not been damaged in transit.
•
After connecting the transformer, plug the unit into the power source and switch on power on ready for use.
•
Please do not plug the Configura® into an extension lead. The chair must have a dedicated power supply.
Note: This product is not unsafe when power is left on.
•
When moving or handling the chair DO NOT use the backrest, use the base only. Using the backrest may
cause damage to the internal framework of the chair.
•
When installing the Cushionair cushion, ensure the pipes are routed correctly through the back of the chair in
the middle to avoid them catching and crushing when the chair is reclined. Also ensure that the power leads
and pipes are positioned so they are clear of any walkways etc to minimise the risk of tripping. Test the pump
and cushion to ensure it inflates correctly before use. The Cushionair should be checked daily for correct
operation.
•
Do not put heavy weights in the pocket.
•
Do not lift the Configura® by the armrests.
Troubleshooting
n
Always disconnect the chair from the power before checking any
part of the chair.
n
Check the wall socket is in working order by trying another appliance.
n
Check the connection from the chair to the transformer.
n
Check to see if any of the cables are damaged; check fuse and
batteries (where applicable).
n
Store the hand controller in either the pocket or on the loop provided.
This will ensure it does not suffer accidental damage.
n
Do not allow children to play on or with the chair.
n
Do not move the chair whilst a person is sitting in it. If you are in doubt
about any of the above, please contact your supplier.
Actions on this page must be carried out by a trained technician