background image

CASH

®

 Magnum XL

GENERAL SAFETY PRECAUTIONS

P15

SECTION 6

©

CASH Cowpuncher

GENERAL PRECAUTIONS AND GOOD PRACTISE

IMPROPER USE

4

  ONLY EVER USE THIS TOOL FOR THE STUNNING OF LIVE ANIMALS

4

  ONLY EVER USE GENUINE ACCLES & SHELVOKE SUPPLIED CARTRIDGES AND SPARES

4

  DO NOT FIRE “AIR SHOTS”(FIRING OF THE BOLT INTO AIR) AS THIS WILL REDUCE THE WORKING  

 

LIFE OF THE TOOL AND ITS COMPONENTS

WORKPLACE PRECAUTIONS

4

  THE TOOL SHOULD BE USED IN WELL ILLUMINATED AND WELL VENTILATED

 

WORKPLACE ENVIRONMENTS

4

  KEEP THE WORKPLACE CLEAN AND CLEAR OF UNNECCESSARY OBSTACLES OR TRIP HAZARDS

4

  ENSURE THE AREA SURROUNDING THE KILLING BOX IS FREE OF SLIPPERY SUBSTANCES. THESE 

 

ARE POTENTIAL SLIP HAZARDS TO THE OPERATOR WHICH COULD LEAD TO SERIOUS INJURY 

 

OR FATALITY IF THE OPERATOR SLIPS WHILST HOLDING A COCKED TOOL 

OPERATIONAL PRECAUTIONS

4

  ONLY LOAD CARTRIDGES WHEN THEY ARE READY TO BE USED

4

  IF A CARTRIDGE STICKS IN THE BREECH AND WILL NOT EJECT, DO NOT USE A SHARP 

 

INSTRUMENT TO REMOVE. THE CARTRIDGE SHOULD BE REMOVED IN ACCORDANCE WITH 

 

THESE INTRUCTIONS IN SECTION 9 - TROUBLESHOOTING

4

  TOOLS MAY BE USED IN AN ALTERNATING SYSTEM AS PART OF A PLANNED OPERATING CYCLE

4

  JOB ROTATION MAY HELP MAINTAIN THE APPROPRIATE HIGH LEVELS OF CONCENTRATION    

 

REQUIRED AT THE WORKPLACE, HELPING TO MINIMISE ANY RISK DUE TO TIREDNESS OR FATIGUE

GOOD PRACTISE

4

  THE CLEANING AND MAINTENANCE SCHEDULE DETAILED IN THIS MANUAL SHOULD BE 

 

ADHERED TO, TO ENSURE THE TOOL OPERATES SAFELY AND CORRECTLY TO PROVIDE 

 

EFFECTIVE ANIMAL STUNNING

4

  AT THE END OF A WORKING SHIFT, OR IF THE TOOL IS NOT GOING TO BE USED FOR PROLONGED 

 

PERIODS, THE UNCOCKED AND UNLOADED TOOL SHOULD BE STORED IN COOL DRY 

 

CONDITIONS AND LOCKED SECURELY IN A WAY THAT NO UNAUTHORISED ACCESS TO THE 

 

TOOL IS POSSIBLE

4

  CARTRIDGES SHOULD BE LOCKED AWAY SEPARATELY FROM THE STUNNING TOOL IN COOL, 

 

DRY CONDITIONS 

4

  EXPOSURE TO EXCESSIVE AMOUNTS OF MOISTURE MAY AFFECT CARTRIDGE PERFORMANCE  

 

WHICH IN TURN WILL AFFECT TOOL PERFORMANCE, WITH THE POTENTIAL TO CREATE AN   

 

INEFFECTIVE STUN OF THE ANIMAL. WET CARTRIDGES WILL NOT FIRE AND SHOULD 

 

NOT BE USED

4

  ALWAYS WASH YOUR HANDS AFTER USING ANY STUNNING TOOL TO ENSURE CLEANLINESS

 

NEVER HANDLE OR OPERATE ANY STUNNING EQUIPMENT WHILST UNDER THE INFLUENCE 

 

OF ALCOHOL OR DRUGS. IF TAKING PRESCRIBED MEDICATION, SEEK THE ADVICE OF YOUR 

 

DOCTOR PRIOR HANDLING OR OPERATING STUNNING EQUIPMENT.

ALWAYS WEAR THE CORRECT PERSONAL PROTECTIVE EQUIPMENT (PPE) WHENEVER YOU 

ARE WORKING WITH, CLEANING OR MAINTAINING YOUR CASH MAGNUM XL TOOL. 

ALWAYS WEAR PROTECTIVE GLASSES AND HEARING PROTECTION. THE CORRECT 

FOOT PROTECTION MUST BE WORN. THERE  IS A RISK THAT IF THE TOOL IS DROPPED, 

THE BOLT MAY PENETRATE THE FOOT OF THE TOOL USER.

Содержание CASH Magnum XL





























Отзывы: