Acclaim Lighting Linear One DMX Exterior, Руководство пользователя

Страница: 19 / 28

17
www.acclaimlighting.com
OPERATION
Linear One fixtures have no external controls and instead rely on RDM (Remote Device
Management) for all configuration via the DMX interface. This allows multiple devices to be
configured either before or after installation.
Various third party DMX/RDM tools are available; we recommend the Acclaim Lighting XMT-
350 for this task.
MAKING A TEMPORARY CONTROL LINK WITH THE XMT-350
Each Acclaim lighting XMT-350 DMX/RDM tool is supplied with a 5-pin male XLR lead that
can be used to make a temporary control input link with the Linear One feed-in cable. Use
a 3-pin terminal block, wire nuts, conn blocks or Wago® connectors to temporarily join the
two cables:
Gray
White
Purple
Red
Black Black
DMX + (Hot)
DMX – (Cold)
Ground
Linear One
DMX feed-in
cable
Male XLR
lead from
XMT-350