11
www.acclaimlighting.com
CONNECTING AND CONTROLLING FLEX TUBES
Flex Tube strips operate at 24VDC and each strip is supplied with an injection molded 16.4’
(5m) feed cable with bare tails. See page 17 for full power requirements.
LINK CABLE GUIDELINES
Connection cables (not supplied) used to link Flex Tubes to the power/driver unit should
follow these guidelines:
•
Up to 40 feet (12m)
18 AWG (0.823mm
2
)
•
Up to 100 feet (30.5m)
14 AWG (2.081mm
2
)
•
Up to 180 feet (55m)
12 AWG (3.309mm
2
)
In all cases, ensure that the voltage drop at the fixture end of the link cable is no greater
than 8% (1.92V) of the original 24VDC supply.
Up to three Flex Tube SC strips
can be run from a single
APS-300-24-IP power supply unit.
Link cables require 2 cores. See
AWG recommendations above.
Mains input
(100-277VAC
50/60Hz)
APS-300-24-IP
power supply
unit
FLEX TUBE
SC
-
NON-DIM
Use Acclaim Lighting APS-300-24-IP 24V power supply.
SINGLE COLOR - NON-DIM
Содержание Flex Tube DW G2
Страница 1: ...Flex Tube SC DW and Spectrum User guide GEN 2...
Страница 2: ......
Страница 30: ...www acclaimlighting com...