Acclaim Lighting Flex One Exterior HO, Руководство пользователя

Страница: 13 / 30

11
www.acclaimlighting.com
TO FIT A LENS
1 Measure the exact length of UV stabilized lens
required between each end of the channel.
2 Carefully cut the lens to length. Ensure that
any resulting burrs are removed.
3 Depending on the channel type:
• Tall profile
: Place one end of the UV
stabilized lens over the channel so that it
slots into the ‘Lens recess’ (see right). Then
run your hand along the length of the lens
to gently push the remainder into place.
• Recessed
: Insert one end of the UV
stabilized lens into the ‘Lens recess’ within
the channel (see right). Then slide the
remaining lens into the recess.
Note: This channel type is not rated for walk-
over installations.
Lens
recess
Tall profile
[FLX888]
Lens
recess
Recessed
[FLX777]
Tall profile
[FLX888]
Recessed
[FLX777]
Note:
Not rated
for walk-over
installations