Acclaim Lighting AJBOX1, Руководство пользователя

Страница: 15 / 20

13
17 After a final check, place the lid onto the box, align the holes with the internal threads
and insert the four screws.
18 Use a #2 Phillips driver to secure the four screws to a reasonable hand-tightness.
ADDITIONAL ENVIRONMENTAL PROTECTION
If the AJBOX1 is to be externally wall mounted in a vertical orientation it is advisable to
apply extra silicone sealant into and around the strain relief cap of the cable gland/fitting(s)
located on the upper-most surface. This will help to prevent moisture from welling in the
head of the gland/fitting and tracking down past the seal into the box.