Acclaim Lighting AJBOX1, Руководство пользователя

Страница: 10 / 20

8
6 In turn, insert the incoming live, earth and neutral lines into the AC IN connector block,
alongside and matching the connections from the internal surge protector.
For each input:
a Press down on the small button (to
open the internal spring contacts).
b Carefully push the correct wire
into the vacant hole until the bare
conductor goes all the way in.
c Release the small button and check,
by gently pulling the wire, that it is
correctly seated and retained.
Note: If the small buttons are not fitted
to the connector block, insert a small
flatblade screwdriver into each hole to
open the spring contacts.