Acclaim Lighting AJBOX1, Руководство пользователя

Страница: 13 / 20

11
10 Once all connections have been made and double-checked, use a #2 Phillips driver to
fix the two connector blocks into place; check for correct alignment with the two screw
lugs located on either side of the divider.
11 Apply a bead of suitable silicone sealant to the thread of the large cable gland and run a
finger round it to spread the sealant across all parts of the thread.
12 Ensure the strain relief cap is loose, then carefully screw the body of the gland into the
outlet hole and tighten it using an adjustable wrench.
13 Push the feed cable slightly into the box (to ensure there’s sufficient slack inside) and
then tighten the strain relief cap of the gland using an adjustable wrench.
Gland
body
Strain
relief cap