AccessECU WRX 2002, Руководство пользователя, Страница: 53 / 70

53
Map Manager T Map Manager T
Map Manager T Map Manager T
Map Manager Troubleshooting roubleshooting
roubleshooting roubleshooting
roubleshooting
Connection Errors Connection Errors
Connection Errors Connection Errors Connection Errors
“ERROR: Unable to find an AccessPORT on any COM port” message? “ERROR: Unable to find an AccessPORT on any COM port” message? “ERROR: Unable to find an AccessPORT on any COM port” message? “ERROR: Unable to find an AccessPORT on any COM port” message? “ERROR: Unable to find an AccessPORT on any COM port” message?
The Map Manager has scanned all available COM ports on your computer and
the AccessPORT did not respond on any port. To resolve this error message:
1.
Verify your AccessPORT is in “Sync to PC” mode and the screen is
displaying “Waiting for PC”
2. Verify you are using the supplied NULL model interface cable. A
standard serial cable WILL NOT work.
3. If using a USB to Serial adapter, verify it has been fully installed and you
are using the latest drivers.
4. Follow the PC Serial Troubleshooting Guide on page XX.
5. If you continue to have trouble, you may try another PC available to
you.
“ERROR: Unable to autodetect an AccessPORT while already connected” “ERROR: Unable to autodetect an AccessPORT while already connected”
“ERROR: Unable to autodetect an AccessPORT while already connected” “ERROR: Unable to autodetect an AccessPORT while already connected” “ERROR: Unable to autodetect an AccessPORT while already connected”
message?
message?
message? message? message?
Occurs when auto-detect in the Configure Communications window is selected
after you have successfully connected to the AccessPORT. If you need to auto-
detect, first select “Connect to AccessPORT” to toggle connection and discon-
nect from AccessPORT.
“Could not identify AccessPORT “Could not identify AccessPORT “Could not identify AccessPORT “Could not identify AccessPORT “Could not identify AccessPORT. Contact T . Contact T . Contact T . Contact T . Contact Tech Support” error message when ech Support” error message when ech Support” error message when ech Support” error message when ech Support” error message when
attempting to connect to the AccessPORT? attempting to connect to the AccessPORT?
attempting to connect to the AccessPORT? attempting to connect to the AccessPORT? attempting to connect to the AccessPORT?
When the Map Manager first connects to the AccessPORT, it will attempt to
determine what type of AccessPORT it is. If it does not recognize the response it
receives from the AccessPORT, this error will occur. This can be due to a number
of reasons:
1.
You are attempting to connect to a StreetTUNER-enabled AccessPORT
using the normal, non-StreetTUNER Map Manager software.
2. You are attempting to connect to an older AccessPORT that has not
been updated to work with the new Map Manager versions. In this
event, you must apply an update located here:
http://www.accessecu.com/support/APPatch.zip
3. The AccessPORT’s onboard memory has been corrupted or otherwise
damaged. Contact technical support for further troubleshooting steps.