background image

VIRUS Owner’s Manual

62

PRG CHANGE ENABLE

Globally swithes the reception of Program Change Data on and off.

MIDI CONTROL LOW PAGE

Here you can determine if you want the first 128 parameters to be sent as system exclusive data (SYS EX)
or as MIDI Controllers (CONTR)  when you have activated MIDI LOCAL OFF (see appropriate section).

MIDI CONTROL HIGH PAGE

Here you can determine if you want the second 128 parameters to be sent as system exclusive data (SYS
EX) or as MIDI PolyPressure data (POLY PRS)  when you have activated MIDI LOCAL OFF (see
appropriate section).

MIDI DEVICE ID

Here you can enter the identification number for system exclusive data transfer. To enable
communication between two Virus units - i.e. to exchange system exclusive data - you must assign the
same MIDI DEVICE ID to both units.

SYSTEM MASTER TUNE

Determines the overall pitch of the Virus. 0 = A 440 Hz.

SYSTEM MEMORY PROTECT

Locks (ON) or unlocks (OFF) the memory in which the sounds of the Virus are stored.
When you switch MEMORY PROTECT on, you can avoid inadvertent overwriting of programs when you
accidentally press the STORE button.

Содержание VIRUS C SERIES

















































































Отзывы: