Access AX600 EFI 4x4 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 72

background image

19



Accelerator lever

The speed of the ATV is controlled via the accelerator lever.

The ATV speed increases when pressing the accelerator

lever using your thumb. Press the accelerator lever slowly.

When starting the engine or riding uphill, press the

accelerator lever slowly, the engine revs up and produces

more power.

To reduce the speed, release the accelerator lever.

e

Note:

The play of the accelerator lever should be 1 to 4 mm,

which can avoid jerking ahead when the engine is started.



Accelerator limiting device

To  protect  a  new  rider  who  is  not  familiar  with  this  ATV
from  an  accident,  this  ATV  is  fitted  with  an  accelerator
limiting  device  that  can  adjust  the  travel  of  the  throttle
valve, which in turn limits engine power.
Adjustment:

＊

Loosen the retaining nut, and then turn the adjusting

screw with a screwdriver rider. Turning clockwise will

reduce the travel of the throttle valve, while turning

counterclockwise will increase the travel and increase the

engine power up to its maximum.

＊

When the appropriate engine power is reached, tighten

the retaining nut again.

((1) Retaining nut (2) Adjusting screw

(2)

(1)

«
...
21
22
23
24
25
...
»

Содержание AX600 EFI 4x4









































































Отзывы:

Нет отзывов

Похожие инструкции для AX600 EFI 4x4

Бренд: Polaris Страницы: 118

Бренд: BOMBARDIER Страницы: 20

Бренд: Ezgo Страницы: 102

Бренд: Polaris Страницы: 690

Giga-Trailer 1840

Бренд: Strautmann Страницы: 39

Бренд: IBOTECH Страницы: 60

Powermover PM5900

Бренд: Ultra-Fab Страницы: 18

Бренд: Dometic Страницы: 96

Бренд: Fisher-Price Страницы: 40

Бренд: Let's Go Aero Страницы: 3

Бренд: E-Z-GO Страницы: 135

Бренд: ULTIMATE TOP DRIVES Страницы: 28

Бренд: Southern Roadcraft Страницы: 54

Бренд: Hisun Motors Страницы: 67

Бренд: Hisun Motors Страницы: 65

Бренд: Hisun Страницы: 68

Бренд: Hisun Страницы: 75

Бренд: Hisun Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды