Access AX600 EFI 4x4 Скачать руководство пользователя страница 12

Страница: 12 / 72



Going downhill

Note: Place your gravity as backward as possible and straighten

both of your arms. Keep the ATV in balance and apply the

rear brake to slow down your speed.

Unless otherwise necessary, do not press the accelerator

lever.

Do not apply only the front brake to avoid the ATV flipping

over.



Riding through water

Watch the speed of water current and its depth if riding through

water is necessary. If water flows very fast or is deep, the

performance of the ATV will be affected, which may cause

unsafely to the rider.

Notes:

1. Do not ride across a river with fast current or great depth to

avoid loss of control of the ATV and cause risk of hazard to

the rider.

2. After crossing the water area, you should check that the brake

function is normal. If it is not, slow down your speed and also

intermittently apply both front and rear brakes to restore the

brake function.

3. If it takes a long period of time to ride through the water area

and the brake system submerges in water too long, it will lead

to loss of brake function. Do not ride this ATV any longer and

take it to the nearest service center for inspection and

servicing.

Содержание AX600 EFI 4x4









































































Результаты поиска

Содержание AX600 EFI 4x4

Отзывы:

Похожие инструкции для AX600 EFI 4x4

Бренды по названию

Популярные бренды

Access AX600 EFI 4x4, Руководство пользователя

Результаты поиска

Содержание AX600 EFI 4x4

Отзывы:

Похожие инструкции для AX600 EFI 4x4

Бренды по названию

Популярные бренды