manualshive.com logo in svg

Access ATB420 series, Руководство по обслуживанию

Поделиться
Скачать
Access ATB420 series Скачать руководство пользователя страница 12

Access keyboards ATB 420/421 Multi-Function Keyboard Product Specification and Service Guide 

 

___________________________________________________________________________ 

Rev 6 

 Access Keyboards 2001 & 2002 - All rights reserved               Page  12 of 37 

 

 

3.  Installation 

Bar code reader
port (wand/HHLC)

AUX serial port
(for connection
of external OCR
reader or
decoded bar
code scanner)

 

3.1 

Configuring and testing the keyboard  

The ATB420/421 has options which are stored electronically and which may be altered using a 
simple utility from Access Keyboards (ATBconfig.exe). This program runs under Windows. 

The ATBconfig.exe may be run with the ATB420/421 connected on any Windows system to set up 
the required ATB420/421 configuration. Once saved the ATB420/421 keyboard saves its settings 
and can then be disconnected and installed on another computer with these settings. 

When run, ATBconfig.exe will scan the computers available RS232 ports and locate the 
ATB420/421 keyboard.

 

 

Please find below the instructions for using ATBconfig.exe: 

Atbconfig.exe

 

 

This utility allows users to configure and test the ATB keyboard and may be download from Access 
Keyboards web link i.e

. www.accesskeyboards.com/downloads/atbutils

. 

1.  Connect the keyboard to a PC running Windows 98, XP, 2000 or NT, by connecting the PS2 
connector to the keyboard port and the serial connector to any available serial port. 

2.  Run the utility ATBconfig.exe.  The program will automatically locate the serial port the keyboard 
is attached to and adjust to its current communication settings. Should this fail for any reason, e.g. 
port not free, connect to an alternative port and click on 'Locate Keyboard'. 

All manuals and user guides at all-guides.com

Содержание ATB420 series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды