Allow the engine to cool before filling the gas tank. Care must be taken
not to overfill the tank. If overfilled, gas may leak onto the engine
creating a fire hazard.
Tighten the gas tank cap securely after filling the tank.
BREAK-IN PROCEDURE
New ATV’s and renewed ATV engine require a “break-in” period. The
first month is most critical to the life of this ATV. Proper operation
during this break-in period will help assure maximum life and
performance from the ATV. During the first 3 hours of operation,
always use less than 1/2 throttle. Varying the engine RPM during the
break-in period allows the components to “load” (aiding the engine
component mating process) and then “unload” (\allowing components to
cool). Although it is essential to place some stress on the engine
components during break-in, care should be taken not to overload the
engine too often.
When the engine starts, allow it to warm up properly. Idle the engine
several minutes until the engine has reached normal operating
temperature. Do not idle the engine for excessively long periods of time.
Maintenance after break-in should include checking of all prescribed
adjustments and tightening of all fasteners. At the discretion and
expense of the owner/operator, the ATV may be taken to an authorized
dealer for this initial service.
.