bend. The minimum thickness of disc is 2.0mm.
4.
When the brake in operation producing any abnormal squeaking sound,
Check if there is foreign agent on the disc. If not, the brake pads are
excess consumed and need to be changed. The minimum thickness of
brake pads is 1.0mm.
Attention:
Brake fluid is corrosive and avoids to plastic, rubber and paint.
Pollute the brake disc and pads that would reduce braking
function.
Do not mix brake fluid with different specifications. Mixed fluid
affects the braking power.
PROTECTIVE RUBBER BOOTS
The protective boots should be inspected periodically.
Suspension/Steering Arm assembly (Right and Left)
1.
Secure the ATV on a support stand to
elevate the front wheels.
2.
Remove both front wheels.
3.
Inspect the suspension/steering arm
assembly boots for cracks, tears, or
performance.
4.
Check the tie rod end free-play by
grasping the tie rod near the end and attempting to move it up and
down.
5.
If boot damage is present or tie rod end tree-play seems excessive,
contact an authorized dealer for service.
BATTERY
The battery is located under the seat.
If the battery is discharged, remove the battery from the ATV and charge
the battery at the standard charging rate of 1.4 amps for 10 hours.
Warning: Anytime service is performed on a battery, the following
must be observed: Keep sparks, open flame, cigarettes, or any other
BOOT
