CERTIFICATION:
cULus
WET
NO.
20351
CONNECT THE WIRES
Connect the black supply wire to the black fixture
wire. Secure with the supplied wire nuts. Connect
the white supply wires to the fixture wire. Secure
with the supplied wire nuts. Either wrap the outlet
box grounding (green) wire around the green
hexagonal screw provided on the mounting plate or
connect it to the supply ground wire provided with
the fixture. Secure all wires with U.L Certified
electrical tape (not supplied).
Tuck all wires carefully into the J-box.
2
MOUNT THE CANOPY
Since the application for this fixture is indoors, the
gaskets
are not
required and their use is optional.
Attach the back plate to the crossbar with the
supplied screws (3). Attach the fixture assembly to
the back plate by aligning the designated holes on
both the back plate and fixture assembly. Secure
with supplied screws (4).
Insert the supplied bulbs into the sockets.
Do not exceed the wattage stated on the warning label
.
3
SECURE THE GLASS COVER
Fit the cover over the bulb and screw onto the
base to secure.
4
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF
YOUR NEW ACCESS LIGHTING
FIXTURE
5
CAUTION
Please ensure that the fitting is cool and switched off
before replacing the bulb.DO NOT use bulbs that might
exceed the maximum wattage as stated on caution
label.
2
