18
6.
THE STEERING
6.1 Ensure the steering lines pass under the joy-
stick correctly. A cable tie can be fitted through
the lower hole to prevent a derail. (fig 18)
6.2 Fit the rudders making sure the rope traveler is
above the tillers.
6.3 Remove the spring clips and pass the
clevis pins up through the holes at the end
of the tillers. Re-insert the spring clips.
(fig 19)
6.4 Fit the alloy joystick extension. (fig
20). If there is a problem of sailors acci-
dentally removing this joystick extension
a spring clip can be fitted. Contact Ac-
cess Dinghy for details.
Also in fig. 20 are the two white cam-
cleats on the aft port side of the console
used to cleat the mainsail and jib reefing
lines.
Fig. 19
Fig. 20
Fig. 18
