13
1.9 Rotate the mast to fully unroll the sail, haul in on the outhaul and cleat it, pull
the starboard reefing line till its knot is as far as it will go on the port side, then
tighten the reefing drum clamp. (The reefing drum clamp is under the console and as
per fig 11). If full sail is not needed at this time release the outhaul and pull the port
side reefing line till its knot stops at the starboard side, cleat the reefing line on the
port side aft of the console, then haul on and cleat the outhaul. (fig 12, reefing
lines)
2.
STEPPING THE FOREMAST.
2.1 Before stepping the mast, unroll
the sail, fit the claw and strut, then
attach the strut to the claw with the
stainless steel spring hook.
(as per fig. 7– page 10; fig. 9—page 11
&
fig. 13)
Fig. 11
Fig. 12
Fig. 13
