14
2.2 At the bow pull the port side jib
reefing line till its knot is at its stop
hard up on the port side of the console
in the cockpit. (see fig 12– page 13,
reefing lines)
2.3 Unhook the jib reefing line tension
shock cord hook (located on back bulk-
head behind the seat) and set up the
reefing line in a loop to complete a full
turn around the foremast reefing drum.
(fig 14, view of loop)
2.4 Step the mast, fit the reefing line
and re-tension the shockcord. (fig 15)
2.5 Presuming the jib sheet block is shackled to the bottom hole of the clewboard, feed
the sheet through the block and down through the deckeye to the turning block, then thru
the deadeye and the cam cleat, then tie a stopper knot in its end. (see fig. 8—page 10 &
fig. 9—page 11).
2.6 At the bow is the jib strut downhaul, free it and attach its plastic hook to the lug on
the front of the claw. (fig 13—page 13).
2.6 Pull in on the downhaul (located on the left side of the console) and cleat it on the
most forward of the 2 black clamcleats. (fig 6 on page 10)
2.7 Check the manual operation of the jib sheet located at the cam cleat on the right side
of the console.
Fig. 14
Fig. 15
