Accent 1400 Hardware Manual for Dedicated Devices
Page 13
Replacing or Removing the Bumper Guards
Your Accent shipped with bumper guards attached to all four corners of the device to provide extra
protection. Four larger bumper guards were also included. If you want to replace the bumper guards,
follow these instructions.
If you replace the bumper guards, be sure to secure them with the screws. Otherwise they can be pulled
loose, creating a choking hazard.
1.
From one of the corners of the device, remove the mounting screw and the bumper guard.
Note:
Save the screw. You will need it to attach the replacement bumper guard (in step 3).
2.
Push the replacement bumper guard onto the corner.
3.
Insert the mounting screw through the hole in the guard and into the hole in the device.
Note:
Be sure to insert the same screw that you removed in step 1.
4.
Tighten the screw.
5.
Repeat steps 1 – 4 for the other three corners.
To remove the bumper guards:
Remove the mounting screws, pull the bumper guards off the corners,
and store the bumper guards and screws in a safe location in case you need them later.
Bumper Guards
