CNC Controller Specialist
16 |
P a g e
This is used to check the controller’s status like E-stop, Machine
Status , Current WCS, Tool offset, Tool number etc.
G52 offset of X,Y and Z axis for selected WCS.
G92 offset of X,Y and Z axis.
Length offset of X,Y and Z axis.
It will show the frequency of X,Y,Z & A axis.
Error history of any error that might have occurred during any
operations. Upto 15 error history can be display.
This will show the total space in the controller. User can store file up
to 500MB.
This will clear error log of the controller.
Displays status of all 16 inputs. It will display ON/OFF based on
inputs signal is present or not.
If any input is present then
respective LED in red colour will turn ON.
Force the any outputs to On/OFF for checking the outputs manually.
When any output is turned On then respective LED in green colour
will turn On.
After finishing trial cycles Controller will ask for Unlock cycle key.
User need to call manufacturer or dealer for this key.
Machine State
G52 Offset
G92 Offset
G43 Offset
Axes Freq
Running Error
Disk Space
Clear Log
Inputs
Outputs
Unlock Cycles
