CNC Controller Specialist
5 |
P a g e
2.3 Analog Output
MeteorCNC provides one analog output which vary from 0-10v.This analog output will help
to run the spindle with on set frequency. To trigger VFD MeteorCNC have dedicated output
as Op3 as shown in Fig.2.3.1
Fig.2.3.1
2.4.Differential Pulse & Direction Outputs
MeteorCNC provides total 4 differential pulse & direction outputs with 500khz jitter free
pulsing for smooth motion.
Fig.2.4.1
Note : It is recommended to use shielded twisted pair cable for reduce noise & pulse
missed issues which occur at Drive’s end.
