Accelleron A100-L T Series, Руководство по сборке

Страница: 14 / 20

Assembly Instructions / A170-L..T, A175-L..T
4 Installing the turbocharger / 4.2 Steps for fastening the turbocharger
© Copyright 2022 Accelleron Industries. All rights reserved. HZTL455311P0003_EN Rev. A June 2022
4.2 Steps for fastening the turbocharger
General information
Subject Requirement / Information
Turbocharger fixing elements ISO property class ≥ 8.8
Washers Hardened, thickness ≥ 15 % nominal thread diameter
Dimension a (compressor end) a = height of turbocharger foot a
Dimension a (turbine end) a = height of turbocharger foot F + spacer sleeve D
Dimension b Hole in bracket
Dimension c Thread length, ≥ 1.5 x nominal thread diameter
Coefficient of friction 0.12 (lightly oiled)
Table 6: General information about fastening the turbocharger
Compressor-end foot
Fig. 7: Compressor-end foot
u Tighten the foot fixing screws or nuts diagonally according to the selected tightening method.
Turbine-end foot
Fig. 8: Turbine-end foot
u Tighten the foot fixing screws or nuts according to the selected tightening method.
Torque-controlled tightening
Product Thread size Height a of foot
[mm]
Tightening torque
[Nm]
A170-L..T M27 100 830
Page
12
/
17