Accelerated Concepts, Inc. ©2016
6300-LX User’s Guide
15 of 32
ACCELERATED.COM
Remote Power Trouble Shooting
On the end of the POE injector cable (see diagram) there are two LEDs. The Red LED marked DC IN will be
illuminated if the 6300-LX Power Supply Unit (PSU) in plugged into an AC power outlet and plugged into the
POE Injector Cable. If the red LED is not illuminated check the following:
•
Ensure that the PSU is plugged into an AC power outlet and is receiving power.
•
Ensure that the PSU’s power plug is correctly connected to the POE injector cable power input socket. The proper
orientation is for the lock tab and clip to align. (See picture below)
The Red LED marked DC IN and the Green LED marked DC OUT will both be illuminated on the POE injector
cable (see diagram) if you have properly connected the PSU and you have connect a length of CAT5 cable
properly to the POE injector cable and the 6300-LX. If the red LED is illuminated and the Green LED not
illuminated check the following:
•
Ensure that you have a good connection at both the ends of you CAT5 cable.
•
Check your CAT5 cable.
If red illuminated,
power is active.
If green illuminated,
then CAT5 is connected
to 6300 with power.
Correct power supply connection
