Accelerated Concepts, Inc. ©2016
6300-LX User’s Guide
11 of 32
ACCELERATED.COM
Site Survey
A cellular site survey is not necessary if your anticipated installation location is known to have strong cellular signal
strength. If you are unsure of available cellular signal strength or are choosing between several installation locations,
follow the below instructions to perform a site survey to determine your best possible installation location.
After the optimal location has been determined, setup the 6300-LX with either the power supply unit or the POE injector cable.
Follow the steps in the “Initial Setup” section above. During a site survey it is useful to use the included
battery pack instead of the power supply unit to power the Accelerated 6300-LX. The battery pack will
power your device for approximately two hours while you perform your site survey. The battery pack is not
rechargeable and should be properly disposed of after use.
Move the Accelerated 6300-LX to different locations within your site to determine the best compromise
between signal strength and installation constraints. Since cellular signal strength may fluctuate, it is important
to
wait at each location for 1 minute while observing the signal strength indicator
on the front of the
device. Minimum cellular signal strength for proper operation is 2 bars.
After the optimal location has been determined, remove the battery pack and connect either the main power
supply unit or POE injector cable (see section labeled Using Remote Power for more information).
Strong Signal
Weak Signal
