Accelerated Concepts, Inc. © 2015
12
of
16
6200-FX Troubleshooting Guide v1.3
Start-up
The 6200-FX device is configured to go through a specific start-up sequence, as detailed below.
1.
Immediately upon powering on, the USB LED will illuminate YELLOW, verifying that power is being
delivered to the 6200-FX. The USB LED should immediately turn BLUE for two seconds, YELLOW
for one second, GREEN for one second, and settle on RED. This indicates that the 6200-FX
successfully booted up and is waiting for the USB modem to be initialized (if connected).
2.
Approximately 10 seconds after power up, the USB, Wireless, and signal strength LEDs will
illuminate in a pattern corresponding to the LEDs section of this Troubleshooting Guide.
LEDs
The 6200-FX has lights on the front panel that help an installer or end-user to discern the current
status. The USB and Wireless LEDs are labeled; the bars outlined in orange are the signal strength
indicator. These lights usually indicate the state of their respective subsystems. Some light patterns
represent the whole system state instead of a subsystem.
The icons in the chart represent the state of the lights.
Black (
) indicates an off light.
White (
) indicates that the light is irrelevant in a pattern – these continue to show their own
subsystem status. Multicolored symbols indicate a changing light.
Examples:
The Wireless light blinks red/off/green/off. The other lights can be any color.
The Wireless light flashes amber twice. The other lights can be any color.
The USB and Wireless lights are alternating red/green.
